JVC UX-D327B - Bluetooth Operation

26
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. Press the
button on the unit or remote control or directly press the BT/UNPAIR
button on the remote control to select the BT mode.
2. Activate your Bluetooth® device and select the search mode. “UX-D327B” will appear on
your Bluetooth® device list.
3. Select “UX-D327B” and enter “0000” for the password if necessary. If connection is
successful, and the unit will make a beep sound twice.
4. To disconnect the Bluetooth® function,
• Switch to another function on the unit or disable the function from your Bluetooth®
device. The unit will make a beep sound.
• Press and hold BT/UNPAIR button on the remote control. The unit will make a beep
sound twice.
If your Bluetooth
® device supports A2DP, play music via your device.
If your Bluetooth
® device supports AVRCP, use supplied remote control to control play.
• To pause / resume playback, press
.
• To skip to a track, press
/ or / .
• Turn the VOL+/VOL– dial on the unit or press the VOL+/VOL– buttons on the remote
control to increase or decrease the volume.
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
UX-D327B_IB_Final200407V5.indd 26 08/04/2020 16:24