12
Playing Back a Tape
To insert a tape
You can play back type I tapes.
To change the tape running direction
To reverse the tape automatically
Playing Back Other Equipment
To connect other equipment
By using a stereo mini plug cord (not supplied), you can
connect equipment with analog audio output jacks such as an
MD player, or a TV, etc.
If the audio output on the other equipment is not stereo
mini plug type,
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
Refer to the manuals supplied with the other equipment.
To select other equipment
To start:
To stop:
To rewind tape:
Tape is played from the forward side to the
reverse side. When the reverse side of the tape
reaches its end, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
Push Insert Close
With the tape side facing backside
F-PLAY: wind forward the tape.
R-PLAY: rewind the tape.
F-PLAY: rewind the tape.
R-PLAY: wind forward the tape.
3 (forward play)
2 (reverse play)
REV.
MODE
IMPORTANT
• Always set volume to “VOL-MIN” when connecting or
disconnecting the other equipment.
Remote control:
Main unit:
AUX
(front panel)
Stereo mini plug cord (not supplied)
Portable audio
device,
Game machine, etc.
AUX
FM/AM/AUX
FM
AUX
AM
UX-G5[UJ].book Page 12 Friday, June 10, 2005 1:07 PM
To Next Page
Loading...
Need help?
General
