11
Preparation
• Connect the power cable after you complete the
other connections.
• The [STANDBY] lamp on the main unit lights up.
When you connect the power cable into the AC out-
let, the demonstration display automatically starts in
the display window. Before using this system, turn
off the demonstration display.
■ When the main unit is turned off
Hold down [DEMO] on the main unit
until “DEMO CLR” appears.
Connecting the power cable
AC outlet
Main unit
(rear view)
Disabling the demonstration
display
Main unit (front view)
Preparation (continued) Do not connect the power cable until all other connections have been made.
UX-GN9V[A]-03.fm Page 11 Wednesday, January 28, 2009 12:45 PM
To Next Page
Loading...
Need help?
General
