JVC XV-D721BK - Page 6

1-6
XV-D721BK
XV-D723GD
Remove the four screws A on each side of the body.
Remove the two screws B on the back of the body.
Remove the top cover from behind in the direction of
the arrow while pulling the lower part of the sides.
1.
2.
3.
Disassembly method
< Main body>
Removing the top cover (See Fig.1)
Prior to performing the following procedure, remove
the top cover.
Remove the sixteen screws C on the back of the
body.
1.
Removing the rear panel (See Fig.2)
Prior to performing the following procedure, remove
the top cover.
Removing the fitting (See Fig.3 to 5)
Lower the mechanism by moving the lever marked a
in the direction of the arrow from the upside of the
body (Refer to Fig.3).
Manually eject the loading tray toward the front.
Remove the fitting from the loading tray by releasing
the joints b on the both sides of the fitting.
Push and return the loading tray.
1.
2.
3.
4.
To remove the front panel assembly and
the DVD mechanism assembly, remove
the fitting in advance.
ATTENTION:
Fig.1
Fig.2
Fig.3
Fig.4Fig.5
Top cover
Rear panel
Lever a
Loading tray
Loading tray
B
CC
A
2
A 2
C
C
CC
Loading tray
Fitting
Joint b
Joint b