32
Initial Settings
● Using the Test Tone
You can play a test tone when adjusting the speaker level or delay time.
1 While adjusting the speaker level or delay time, press 5/∞ to select Test Tone, then press [ENTER].
You can play a test tone from all speakers except the subwoofer.
• To play the test tone from a specific speaker, press 5/∞ to select the speaker.
2 Press 2/3 to adjust the Level or Delay setting.
3 Press 5/∞ to select Test Tone, then press [ENTER] to stop the test tone.
XVD9000E_p25-32.p65 2/27/01, 2:38 PM32
To Next Page
Loading...
