EasyManua.ls Logo

JVC XV-D9000 - A-B Repeat Playback; Changing the Audio Channel [AUDIO]

JVC XV-D9000
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Playing Audio CD and Video CD Discs
Using repeat playback during random playback
REPEAT : Repeats all tracks in a random order.
REPEAT 1 : Repeats the selected track.
No display (OFF) : Repeat playback is not performed.
Cancelling Repeat Playback
Press [REPEAT] to select No display (OFF).
Repeat playback is also cancelled if you used [PLAY MODE] to change the playback mode.
It is also cancelled if you open the disc tray or switch the power off.
A-B Repeat Playback
AUDIO
CD
VIDEO
CD
You can repeat a specified section within a single track.
While an Audio CD or Video CD is playing (You cannot select this during program or random playback.)
1 Press [REPEAT A-B] at the starting point of the section you want to repeat.
REPEAT A- appears in red, and the A-B Repeat start point is stored.
2 Press [REPEAT A-B] again at the finish point of the section you want to repeat.
REPEAT A-B appears in red, and the A-B Repeat finish point is stored.
Repeat playback of the section between A and B begins.
You can also use ¡ (Fast forward) to search for point B.
Cancelling A-B Repeat Playback
You can cancel A-B repeat playback by pressing [REPEAT A-B].
If you perform an operation that goes beyond point B (skipping ahead to the next track, etc.), A-B repeat playback
is cancelled. Or you can press 7 (Stop) to cancel it.
It is also cancelled if you open the disc tray or switch the power off.
If you exit the track, the A point is cancelled. (You only perform A-B Repeat within a single track.)
Changing the Audio Channel [AUDIO]
VIDEO
CD
Some Video CD discs, such as Karaoke discs, include several audio channels: one channel with a vocal track and one
channel without a vocal track. When playing these types of discs, you can select the channel with vocals or without
vocals.
While a Video CD disc is playing
1 Press [AUDIO].
The audio channels (L/R, L, or R) are displayed on the TV screen.
2 Press 2/3 to switch between the channels.
You can choose between the following three settings.
L/R : Normal stereo playback.
L : Outputs the L (Left) channel to the left and right speakers.
R : Outputs the R (Right) channel to the left and right speakers.
XVD9000E_p58-62.p65 2/27/01, 2:41 PM62

Table of Contents

Related product manuals