JVC XV-M555BK - Getting started; Connections

Getting started
12
Getting
started
English
Français
XV-M555BK [B, E, EV] EN
LVT0391-003A
COMP. Y/C
AV
PCM/STREAM
OPTICAL
VIDEO S-VIDEO
LEFT
RIGHT
AUDIO OUT DIGITAL OUT
VIDEO OUT AV OUT
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)
Getting started
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts
stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-
video cable in addition to the (standard) video connection to get better picture quality.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Do not connect the unit to an NTSC television. Connect it to a PAL television.
Audio/video cable
(supplied)
S-video cable
(supplied)
The unit
TV
White
Red
Yellow
Red
White
Yellow
NOTES