Introduction
Introduction
2
English
Français
XV-M555BK [B, E, EV] EN
LVT0391-003A
27
Advanced
operations
Advanced operations
3
Press ENTER.
The unit starts random playback of the selected
disc.
When all titles/tracks of the disc have been played
once, the unit starts random playback of the next
disc (if inserted). After playing all titles/tracks of
the second disc, the unit starts random playback
of the third disc (if inserted). After playing all
titles/tracks of all the discs, random playback
ends.
The same title or track will not be played back more than
once during random play.
• To stop/quit random playback in the middle
Press 7 to stop playback. The unit is still in random
playback mode, so pressing # starts random
playback again.
To quit random playback, press 7 again while
stopped.
Some DVD discs may not be played back correctly in
random mode.
NOTE
DISC 2DISC 1
SLOW (–)
PREVIOUS SELECT NEXT
SLOW (+)
DISC 3
PLAY MODE SUBTITLE
AUDIO ANGLE
DIGEST STROBE ZOOM CANCEL
1234
TV
DVD
ENTER
MENU
TITLE
RETURN
CHOICE
DISPLAY
TIME
To playback titles or tracks in random
order [RANDOM]
You can play titles or tracks on the discs inserted in
random order by using the Random function.
7
While stopped
1
Press PLAY MODE.
The play mode menu appears on the TV screen.
2
Use CURSOR 2/3 to move to
[RANDOM].
REPEAT PROGRAM RANDOM
2, 3
1
About this instruction manual
This instruction manual basically explains operations as follows:
These symbols
indicate the types
of discs which the
operation can be
used for.
The number
indicates the
following procedural
step(s) in which the
button(s) is(are)
used.
You may also use
the corresponding
buttons on the front
panel of the unit if
available.
The names of
buttons on the
remote control unit
(or on the front
panel of the unit) are
all given in
uppercase letters.
The number
indicates the
procedural step.
Other convenient
procedures, etc.
Additional
supplemental
remarks
To Next Page
Loading...
