7
Connecting to optional audio equipment
Connecting to a stereo audio amplifier/receiver
Connect the player’s AUDIO OUT (LEFT/RIGHT) jacks to any
line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
Connecting to a digital audio device
You can enjoy sound of enhanced quality by connecting the
player’s DIGITAL OUT (COAXIAL) jack to a digital input of an
amplifier, etc., using a or coaxial digital cable. The digital audio
signal on a disc will be transferred directly from the player. If the
connected digital audio equipment is a Dolby Digital or DTS
decoder or an amplifier with a built-in decoder, you can enjoy
high-quality surround sound.
NOTES
• It is not recommended to use the digital jacks for dubbing.
When recording the sounds (DVD VIDEO, SVCD, Video CD or
Audio CD) played back on the player, record them through the
analog jacks.
• Depending on the disc, no signal may be output from the
DIGITAL OUT. Make an analog connection in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference
display correctly according to the connected digital audio
equipment. If setting made for [DIGITAL AUDIO OUTPUT] is
incorrect, loud noise may be generated causing damage to
the speakers (see page 27).
RIGHT
LEFT
AUD O
IN
RIGHT
LEF
T
V
IDEO
COAX AL
D G TAL OUT
P
R
P
B
Y
VIDEO OUT
AUDIO OUT
AV OUT
OMPONENT
White
Red
The player
Audio cable (not supplied)
Amplifier or receiver
White
Red
Only for XV-N310B/XV-N312S/XV-N315B/XV-N316S
RIGHT
LEFT
AUDIO
DIGITAL
IN
IN
RIGH
LEFT
VIDEO
COAX AL
DIGITAL OUT
P
R
P
B
Y
VIDEO OUT
UDIO OU
AV OUT
OMPONENT
The player
Audio cable (not supplied)
Digital equipment
Coaxial digital cable (not supplied)
Only for XV-N310B/XV-N312S/XV-N315B/XV-N316S
White
Red
White
Red
To Next Page
Loading...
