How to fix a JVC XV-N670BUB DVD Player remote that is not working?
If the remote control isn't working properly with your JVC DVD Player, try these steps: * Make sure the remote is pointed directly at the remote sensor on the DVD player. * Ensure you are operating the remote control within a close range of the DVD player. * Verify that the current remote control code matches the unit's code.
What to do if my JVC DVD Player does not start playback?
If your JVC DVD Player does not start playback, the disc inserted may not be playable. Ensure you insert a playable disc, checking both the disc type and the regional code for compatibility.
Why my JVC XV-N670BUB DVD Player has no sound?
If there's no sound coming from your JVC DVD Player, check these things: First, make sure the equipment connected to the audio cable is set to receive DVD sound output by selecting the correct input mode on the audio receiver. Check that the connected equipment is powered on. Finally, ensure that the AUDIO options are correctly configured and then turn on the DVD player again.
How to troubleshoot a JVC XV-N670BUB DVD Player that has no power?
If your JVC DVD Player isn't turning on, the most likely cause is that the power cord is not properly connected. Ensure the power cord is securely plugged into the wall outlet.
Why won't my JVC XV-N670BUB DVD Player start playback?
If your JVC DVD Player isn't starting playback, it could be due to an incompatible disc. Ensure you're using a playable disc, and check the disc type and regional code for compatibility.
Why is there no picture on my JVC DVD Player?
If you are getting no picture on your JVC DVD Player, there are a few potential causes. First, your TV might not support the resolution set on the DVD player. Consult your TV's manual and use the RESOLUTION button on the DVD player to select a compatible resolution. Second, ensure that your TV is set to receive the DVD signal output. Finally, check that the video cable is securely connected.
What to do if my JVC DVD Player has no power?
If your JVC DVD Player has no power, the power cord may be disconnected. Make sure to securely plug the power cord into the wall outlet.
Why is my JVC DVD Player remote control not working?
If the remote control isn't working properly with your JVC DVD Player, try these solutions: First, ensure that you are pointing the remote control directly at the remote sensor on the DVD player. Next, make sure you are operating the remote control close enough to the DVD player. Finally, the remote control code might not match the unit. Identify the correct remote control code for your unit (see page 23).
What to do if there is no picture on my JVC XV-N670BUB DVD Player?
If there is no picture on your TV when using the JVC DVD Player, there might be a few reasons. First, the TV might not be set to receive the DVD output, so select the appropriate video input mode on your TV. Also, the video cable might not be connected securely, so ensure it is properly connected. Finally, your TV might not accept the resolution set on the unit. Consult your TV's manual and use the RESOLUTION button on the DVD player to set a compatible resolution.
Why is there no sound coming from my JVC XV-N670BUB?
If you're experiencing no sound with your JVC DVD Player, there are a few things to check. Ensure that the equipment connected with the audio cable is set to receive the DVD audio signal output by selecting the correct input mode on the audio receiver. Also, verify that the connected equipment is powered on. Lastly, check that the AUDIO options are set correctly, then turn the DVD player off and on again using the STANDBY/ON button.
General| Type | DVD Player |
|---|---|
| Audio Formats | Dolby Digital, DTS |
| Video Outputs | Composite, S-Video, Component |
| Progressive Scan | Yes |
| Remote Control | Yes |
| USB Port | Yes |
| Disc Formats | DVD-R, DVD-RW, CD, CD-R, CD-RW |
| Audio Outputs | Digital Optical, Digital Coaxial |
| Upscaling | Yes |
To Next Page
