Do you have a question about the JYX FF-S8-T and is the answer not in the manual?
Insert batteries and turn on microphones for automatic connection to the machine.
Insert card, select LINE mode, and use play/arrows to control MP3 files.
Turn on machine, select BT mode, and pair with device for audio playback.
Use RCA cable to connect TV audio output to the machine's AUX-IN port.
Use 3.5mm audio cable to connect device headphone jack to the machine's AUX-IN.
Control playback (Play/Pause, FF, FR) and song selection (PREV, Next, Numeric keypad).
Adjust volume (Vol+, Vol-), mute audio, and switch modes (Mode, REP).
Master Volume, Mic Volume, Echo, Power, Mode, Play/Pause, and REC buttons.
USB, SD Card, AUX-IN, Recording, and Microphone ports for connectivity.
Charging indicator, charging input, and LED light switch.
Number keys for song selection and navigation buttons (Next, Previous).
Plug in the power adapter to activate lasers; use the remote to control functions.
Avoid direct eye exposure to lasers; suitable for indoor use only.
Details on buttons like ON/OFF, LED, LASER, A1-A3, FLASH, Music modes, and PAUSE.
Explains Class 3R laser power, safety, and potential hazards.
Provides instructions on safe operation, avoiding staring, and legal restrictions.
| Microphone | 2 Wireless Microphones |
|---|---|
| Signal-to-Noise Ratio | ≥70dB |
| USB Port | Yes |
| Bluetooth | Yes |
| Connectivity | Bluetooth, USB |
| Input Voltage | AC 110V-220V |
| Microphone Input | 6.35mm |
Loading...