1
Owner’s Manual
Please read this manual and follow its instructions carefully. The words
WARNING, CAUTION, and IMPORTANT carry special meanings and should be
carefully reviewed.
WARNING - Failure to read, understand and follow all
warnings and instructions listed could result in serious injury or death to
self or others.
CAUTION - These instructions point out special safety
procedures or precautions that must be followed to avoid damaging the
augers, injuries to self and others.
IMPORTANT - This provides special information to make usage of the K-Drill
easier and important instructions more clear.
Table of Contents
Product Introduction 1
Drill Setup 3
Attaching to the Drill 3
Drilling Ice Holes 4
Redrilling Holes 5
Safety & Usage Tips 6
Replacing the Blades 8
Free Lifetime Sharpening 9
Parts & Accessories 10
Cordless Drill Requirements 11
Specications 11
Limited Warranty 13
K-Drill Patent #7,946,355
Introducing the K-Drill Ice Auger
EfciencyandlightweightperformancebestdescribestheK-DrillIceAuger.Both
the 6” and 8” K-Drill Ice Augers are designed to be driven with rechargeable elec-
tric drills or gas power heads.
The unique center tip and high carbon steel chipper blades allow for quick and
clean holes under all ice conditions. K-Drill will also work exceptionally well when
re-opening existing holes.
TheK-Drillhasitsownotationsystemtopreventitfromsinkingdowntheholeif
it should come detached from the drill. The 6-inch K-Drill Ice Auger cuts a 6” hole.
However, the 8-inch K-Drill cuts a 7-1/2” hole.
To Next Page
Need help?
General
