43
EN
Why do I have to descale the machine if I am using the water filter?
If the water filter is regularly changed, no descaling is necessary. Nevertheless, it is possible that
mineral deposits occur depending on the water quality and the machine location. For this reason we
recommend an annual cleaning / rinsing process using a K-fee® – your system Descaler.
Why does the machine suddenly switch off during a period of intensive use?
If the cooling-down period is too short, the machine switches itself off as protection against over-
heating. The buttons flash green for approx. 1 minute. The machine is then ready to operate again.
Why does the machine switch itself off?
The machine switches off automatically if it is unused for more than 5 minutes. Please remember that
the machine uses power as long as it is plugged in the mains socket (< 0.5 W).
How do you reset the machine to the factory settings?
Switch the machine off using the on/off button. Press the "small cup" and "large cup" buttons at the
same time and switch the machine back on. The milk/rinse button lights up once again as confirma-
tion.
Frequently asked
questions (continued)
To Next Page
Loading...
