Need help?Do you have a question about the K-Rain RPS469 and is the answer not in the manual?
Steps to set up automatic watering schedules for groups of stations.
Tips and guidance for intuitive and hassle-free programming of the controller.
Instructions for setting the current time and day of the week on the controller.
Detailed steps for setting the first start time for Program 1 on the controller.
Selecting watering days, including individual and odd/even day options.
Setting the duration each station will water for a specific program.
Installation and configuration of a rain sensor to prevent watering during rain.
Adjusting station run times by percentage for water saving based on seasons.
Important safety and procedural instructions for electrical connections.
General| Model | RPS469 |
|---|---|
| Number of Zones | 6 |
| Stations | 6 |
| Display | LCD |
| Weather Sensor Compatibility | Yes |
| Mounting | Wall Mount |
| Transformer | Included |
| Programs | 4 |
| Start Times | Up to 4 per program |
| Station Capacity | 6 stations |
| Voltage | 24 VAC |
| Rain Delay | Yes |
| Manual Watering | Yes |
| Outdoor Use | Yes |
| Power Source | AC Power |
| Programming | Flexible |
| Watering Days | 7-day watering |
| Watering Duration | 1 minute |
| Battery Backup | Yes |
To Next Page
