Need help?Do you have a question about the K2 PUMPS UTM02501K and is the answer not in the manual?
General| Brand | K2 |
|---|---|
| Model | PUMPS UTM02501K |
| Category | Water Pump |
| Language | English |
Ensure proper grounding, use 115V GFCI outlets, and avoid wet conditions.
Do not pump flammable liquids or use in presence of flammable vapors.
Use of extension cords is prohibited due to voltage drop and safety hazards.
Details the pump's use as submersible or non-submersible utility and transfer pump.
Lists necessary but not included materials like garden hose.
Attach a 3/4 in. garden hose with gasket to the pump outlet.
Place pump on solid base in flooded area and plug into 115V GFCI outlet.
Monitor operation, unplug when water is low, and remove pump and hose after use.
Attach suction hose to strainer and place in at least 1 in. of water.
Connect suction hose to pump inlet and garden hose to discharge outlet.
Unscrew priming plug, fill water until overflow, then tighten plug.
Unplug pump, remove debris from screen.
Troubleshoots common issues for submersible utility pump operation.
Troubleshoots common issues for non-submersible transfer pump operation.
Details coverage, exclusions, and terms of the product's limited warranty.
To Next Page