Kaabo Skywalker 8 - Basic Operation; Speed Control

Step1:
Step2:
Step3:
Step4:
Step5:
Step6:
Switch off
Pull T-tubes to the le and
right sides respecvely.
Fold the handles.
Open the locking nut.
Withdraw the extension
Unlock the protecon pin.kick down
the folding lever and push the handlebar
forward to fold the scooter.
Always keep protecon pin in posion
when the scooter is unfold
Fold
Power Switch
04
BASIC
OPERATION
Press the power switch for 3 seconds and the LCD panel will light
up, power on now.If the scooter le 90 second unmoved, power
will be off automacally.
Speed Control
Power Indicator
When the power is on ,press the power switch and then
the MODE buon, the screen will show the level of speed.
press Mode to change the Level (L1,L2,L3).
Small rectangles indicates baery power.
Do not wait to change unl baery is fully running out.
Change the scooter mely when there is only one rectangle
or two le to avoid damage of baery.
17 18