OPENING THE LOCK
1. Enter valid six (6) digit combination. The lock will signal a valid combination entry with
a double signal.
2. Within four (4) seconds, turn the keypad to the open position (clock-wise) if using a
deadbolt style lock, or turn the handle to the open position if using a swingbolt
style lock.
3. Pull door open.
Invalid Combination Entry - Lock will signal three (3) times.
Security Considerations - On safes using more than one lock the swingbolt must
lock first.
CHANGING MANAGER AND USER COMBINATIONS
ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN
1. Enter “zero” six times.
2. Enter your existing six (6) digit combination one time.
3. Enter your new six (6) digit combination two times.
4. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 3.
5. Test lock operation several times before closing the door.
Valid Combination - Double signal after valid six (6) digit combination is entered.
Invalid Combination - Triple signal indicates the old combination is still valid.
CAUTION: When selecting a combination do not use birthday or other predictable
data that could give correlation between the user and combination. Keep the
combination secret.
© copyright 2004-2008 (P/N) 760.128 Rev A
12/08 Kaba Mas LLC
Page 1 of 2
FEATURES
MANAGER COMBINATION (Factory set to 1-2-3-
4-5-6)
USER COMBINATION
WRONG TRY PENALTY
initiates five (5) minute delay period.
LOW BATTERY WARNING
opening indicates battery is low and needs
immediate replacement.
AUDIO AND VISUAL SIGNAL
beeps - indicates entry is valid or accepted.
beeps - indicates invalid or not accepted.
4200 Swingbolt Lock 3740-2 Deadbolt Lock
3000 Entry
(Swingbolt
Only)
3750 Entry
3715 Entry
(Swingbolt
Only)
3190 Privat
II
(Optional)
3710 Entry
(Swingbolt
Only)
To Next Page
Need help?
General
