Page 9 82021 Code-Combi K Kaba Mauer GmbH
GB
2 Signals and what they mean
Plastic control unit:
Diagram 1: Control unit
Symbol Signal Meaning
1 x
Green LED fl ashes once Valid 6-digit code entered
Green LED remains lit up Lock is ready for programming
3 x
Red LED fl ashes 3 times
Invalid code entered or
entry suspended by pressing P
button
10 x
Red LED fl ashes 10 times
after ON button pressed
Insuffi cient voltage
1, 2, 4, 8 or
16 minutes
Red LED fl ashes every second for
1, 2, 4, 8 or 16 minutes
after ON button pressed
Lock is in blocked status
3 x
Red and green LED fl ash
alternately 3 times
Lock was last opened with
another code
2 x
Acoustic signal sounds 2 times New 6-digit code entered
3 x
Acoustic signal sounds 3 times Invalid 6-digit code entered
3 Codes
The lock can be opened with a single code (primary code) or with two codes (primary or se-
condary code). Only the holder of the overriding primary code is able to release the seconda-
ry code.
Primary Code: 6-digit secret combination
Secondary Code: Additional 6-digit combination for a further user of the safe
green LED red LED
bar handle
To Next Page
Loading...
