Kaba Mauer 82021 Code-Combi K - Alteration of Secondary Code by Secondary Code Holder; Cancellation of Secondary Code by Primary Code Holder; Locking

Kaba Mauer GmbH 82021 Code-Combi K Page 12
GB
4.5 Alteration of secondary code by secondary code holder
1) Open lock with valid 6-digit secondary code (see 4.1)
2) Press ON
3) Press P
4) Enter valid 6-digit secondary code
5) Enter new 6-digit secondary code
/ 2 x
6) Enter new 6-digit secondary code again
1 x
7)
Test newly programmed secondary code by locking and opening once
more
If the new secondary code as per 6) was incorrectly confi rmed, the signal 3 x
appears.
Repeat the sequence.
4.6 Cancellation of secondary code by primary code holder
1) Open lock with valid 6-digit primary code (see 4.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Press P
6) Press 0
1 x
4.7 Locking
In conjunction with a boltwork: After the door has been closed the boltwork must be locked
and the lock closed.
1) Turn bar handle counter clockwise until stop position reached