Kaba Mauer 82021 Code-Combi K - Alteration of Primary Code by Primary Code Holder; Switching on Secondary Code by Primary Code Holder

Page 11 82021 Code-Combi K Kaba Mauer GmbH
GB
4.3 Alteration of primary code by primary code holder
1) Open lock with valid 6-digit primary code (see 4.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Enter new 6-digit primary code
/ 2 x
6) Enter new 6-digit primary code again
1 x
7)
Test newly programmed primary code by locking and opening once
more
If the new primary code as per 6) was incorrectly confi rmed, the signal 3 x
appears.
Repeat the sequence.
4.4 Switching on secondary code by primary code holder
1) Open lock with valid 6-digit primary code (see 4.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Press P
6) Press 3
7) Enter new 6-digit secondary code
/ 2 x
8) Enter new 6-digit secondary code again
1 x
9)
Test newly programmed secondary code by locking and opening once
more
If the new secondary code as per 8) was incorrectly confi rmed, the signal 3 x
appears.
Repeat the sequence.