LOCK OPERATION & RESPONSES
• To “power” a self-powered lock, turn the dial back
44
44
4 and forth
33
33
3 in both
directions.
• The lock is “powered” when simultaneous green
G
and red
R
flashes
display with a beep
88
88
8.
• Each keystroke generates a green flash
G
with a beep
88
88
8.
• To cancel entry, press
.
• The completion of a step within an operation is indicated by a green flash
G
with a beep
88
88
8.
• The successful completion of an operation is indicated by simultaneous
green
G
and red
R
flashes. On a Battery powered lock, there will also be
a beep
88
88
8 .
• An error is indicated by three red flashes with beeps.
R
88
88
8
R
88
88
8
R
88
88
8
• On a Battery powered lock, a Low Battery Condition is indicated by rapidly
alternating green
G
and red
R
flashes at the time the lock is opened.
OPEN/CLOSE THE CONTAINER
1. For self-powered lock, power
44
44
4
33
33
3 the lock
G
R
88
88
8
2. Position the dial to cover the red bar.
3. • For Single Mode
EE
EE
E (Factory combination is “50 25 50”.)
Enter Manager User (User 1) or User 2 combination.
G
88
88
8
• For Dual Custody Mode
EE
EE
E
EE
EE
E
Enter User 1 or User 2 combination.
G
88
88
8
Enter the second combination.
G
88
88
8
Wrong Try Penalty: 5 wrong tries =
3 min. lockout (Timed only while lock is powered.)
Each additional wrong try = 3 min. lockout
Red flashes with beeps
R
88
88
8 will occur during the lockout while lock is powered.
4. • For Slide Bolt, immediately rotate the container handle to retract bolt
works before green
G
and red
R
lights flash. Open the container door. To
close and lock the container, close the door and rotate the container handle back
to locked position.
• For Dead Bolt or Spring Bolt, immediately turn the dial to the right
33
33
3 to
retract the bolt before green
G
and red
R
lights flash and open the con-
tainer door. To close and lock the container, close the door. For Dead Bolt, you
must also turn the dial to the left
44
44
4 until the bolt is fully extended.
To Next Page
Loading...
