To Next PageTo Next Page
Need help?Do you have a question about the Kaco blueplanet 50.0 TL3 and is the answer not in the manual?
General| AC voltage range | 320 V - 480 V |
|---|---|
| AC frequency | 50 Hz / 60 Hz |
| Max. AC current | 76 A |
| Total harmonic distortion | < 3 % |
| Number of MPPT trackers | 2 |
| Protection class | IP65 |
| Topology | Transformerless |
| Operating temperature range | -25 °C to +60 °C |
| Power Output | 50 kW |
| DC disconnector | Integrated |
| Communication | Ethernet |
Details about warranty conditions and how to obtain them.
Clarifies terminology used in the manual for better understanding.
Information regarding trademark recognition and usage.
Purpose and scope of the operating instructions and related documents.
Links to additional resources and detailed information on the manufacturer's website.
Explains the symbols and conventions used throughout the manual.
Defines the qualified personnel required to perform operations.
Defines the intended application of the inverter and country-specific regulations.
Lists the built-in monitoring and protection functions of the device.
Explains how the inverter converts DC to AC and feeds it into the grid.
Illustrates the circuit diagram and components of a system with two inverters.
Presents detailed electrical specifications for various device models.
Provides general electrical and operational data, including efficiency and interface details.
Details environmental specifications like installation height, temperature, and protection rating.
Instructions for checking the included equipment and reporting damages.
Safety precautions and guidelines for safely moving the device.
Key to codes for tools and tightening torques used in assembly and maintenance.
Step-by-step instructions for safely unpacking the inverter.
Guidelines for securely attaching the mounting bracket, including material suitability.
Procedure for safely lifting and securing the inverter onto the installed mount.
Essential safety information and requirements before proceeding with installation.
Instructions on how to safely open the device housing for access.
Identifying the location of AC and DC connection points within the device.
Detailed steps and requirements for connecting the device's electrical components.
Procedure for establishing the AC connection to the power grid.
Steps for configuring and connecting the DC input from the PV generator.
Procedure for establishing equipotential bonding for safety.
Ensuring the IP65 protection class by properly sealing all openings.
Guidance on inspecting the device and cables for external damage and operating status.
Instructions on how to clean the device housing and heat sink safely.
Step-by-step guide for removing and replacing the internal cooling fan.
Procedure for safely checking and replacing DC string fuses.
Safety shutdown sequence required before performing maintenance or troubleshooting.
Information on the overvoltage protection module and its handling.
Steps for safely disconnecting AC and DC electrical connections.
Detailed safety instructions for safely powering down the device.
Procedure for safely removing the device from its mounting.
Steps to detach the device from the mounting hardware.
Instructions for properly packaging the device for storage or transport.
Guidelines for storing the device to prevent damage from condensation.
