24
F01 KAFAS
Operation and Indication
In order for the driver to be able to activate and use the high-beam assistant, the light
switch must first be set to Automatic or light switch position II.
In the F01/F02, the high-beam assistant has its own activation button in the turn signal/
high-beam stalk on the steering column.
While the high-beam assistant can be activated at any time with the light switch in posi-
tion II, there is an additional prerequisite in the Automatic position whereby the automatic
driving lights controller must have already switched on the lights.
Light switch in position A
Light switch in position II
To Next Page
Loading...