31
F01 KAFAS
Check Control Indicator
The Check Control may display messages under the conditions described below.
Cause Condition Sending unit
Hardware/software defect "Internal fault" FLA or footwell module
Sensor field covered FLA detects covered windshield FLA
Check Control
message
Condition
Information in Central
Information Display
High-beam assistant
not active
High-beam assistant not active.
Sensor field covered. Manual activation
and deactivation of high-beam.
High-beam assistant
defective
High-beam assistant defective.
Have the system checked by the nearest BMW Service.
Sensitivity adjusted
High-beam assistant sensitivity adjusted for
automatic high-beam headlights.
Possible risk of dazzling oncoming vehicles.
To Previous Page
Loading...