Kaisai ONE - Sleep Operation

How to operate your unit without
the remote control
To operate your unit manually:
BEFORE MANUAL OPERATION
Unit must be turned o before manual operation.
Manual Operation(without remote)
2
CAUTION
11. Locate the MANUAL CONTROL button on
the right-hand side panel of the unit.
2. Press the MANUAL CONTROL button one
time to activate FORCED AUTO mode.
3. Press the MANUAL CONTROL button again
to activate FORCED COOLING mode.
4. Press the MANUAL CONTROL button a third
time to turn the unit o.
Manual control
button
The manual button is intended for testing
purposes and emergency operation only. Please
do not use this function unless the remote
control is lost and it is absolutely necessary. To
restore regular operation, use the remote control
to activate the unit. Unit must be turned o
before manual operation.
In the event that your remote control fails to
work, your unit can be operated manually
with the MANUAL CONTROL button located
on the indoor unit. Note that manual opera-
tion is not a long-term solution, and that
operating the unit with your remote control
is strongly recommended.
56
EN
The SLEEP function is used to decrease energy
use while you sleep (and don’t need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F) after
1 hour, and will decrease an additional 1°C (2°F)
after another hour.
It will hold the new temperature for 5 hours, then
the unit will turn o automatically.
Note: The SLEEP function is not available in
FAN or DRY mode.
Sleep Operation
Set
temperature
Saving energy during sleep
1hr
1hr
7 hours
timer o
+/- 1 C/2 F
SLEEP Operation
+/- 1 C/2 F
•
Unit
Specifications
and Features
The SLEEP function is used to decrease energy
use while you sleep (and don’t need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F) after
1 hour, and will decrease an additional 1°C (2°F)
after another hour.
The SLEEP function ends after 8 hours and then the
air conditioner will change to the normal operating
mode.
The device will
keep running
until turned o
by the user.
EN
64 65