Kaiser Baas R30 - Setting up the R30 Car DVR

10
English
Side
Setting up the R30 Car DVR
• Insert Micro SD card in the
Micro SD card slot on the
side of the R30 Car DVR.
• Camera will power up and
start recording as soon as
it receives power from the
DC power connection (eg.
when you start your car).
• Clean the area on your windscreen making
sure desired placement is not blocking the
drivers view.
• Attach the R30 to the mount by sliding
the camera connection from right to left
along the mount connection until latched.
• Remove the protective skin from the 3M
adhesive on the mount.
• Stick the adhesive to the inside of the
front windscreen in the desired position,
and press for 30 seconds to ensure that
the camera is secure.
• Adjust the nut to ensure that the camera is
correctly angled.
• Finally connect the R30 to power using
the DC power cable and the USB car
charge adaptor.
General:
Car set up:
Side