24
English
LED Indication
“RED” Status LED ON R30 is under Normal Looping
Recording.
“RED” Status LED
Flashes continuously
Counting down and the R30 is going
to turn o due to the power source is
removed.
“PURPLE” Status LED ON R30 is under Event Protection
Recording.
“BLUE“ Status LED ON R30 is connecting to PC through USB
cable.
Blue & Red status LED
alternating flash
1. No memory card is installed
2. Memory card is less than 8GB
3. Card error
“ORANGE” GPS LED ON GPS signal is received.
“ORANGE” GPS LED
Flashes
No GPS signal or GPS signal is weak.
“GREEN” WiFi LED ON WiFi is initializing.
“GREEN” WiFi LED
Flashes slowly
WiFi is ready for connection or
enabled.
“GREEN” WiFi LED
Flashes rapidly
Data is transferring in WiFi mode.
To Next Page
Loading...
