CAMERA SETUP
11 - ENG
Beep Sound
Toggle the menu click noise on/o.
Date/Time
To set the date & time. Use the Up/Down
button to adjust the values and press the
Record button to jump to next character.
Car Mode
Car Mode lets you use the X200 camera
like a Dash Camera and record in Loop
Mode. When enabled the X200 will begin
recording the moment a power input/
source has been detected.
When the power source has been shut o/
disconnected the camera will record for
an interval (see delay section) and then
power o.
Delete
To delete a single le or all les.
Format
This option will format the MicroSD card.
Recommended prior to using any MicroSD
that has been used in other devices.
Note: Formatting the card will permanently
erase all data on the card. Be sure to
backup any content prior to formatting.
Default Setting
This setting will restore all settings to
factory default.
Version
Displays the current rmware version
installed on the X250.
Support
Having trouble with your camera?
Don’t worry, our friendly support team can help.
Please visit us at: www.kaiserbaas.com/support
or send us an email at: helpdesk@kaiserbaas.com
Regulatory Information
To see the complete list of country compliance and
certication, please visit kaiserbaas.com/support
To Next Page
Loading...
