Kaiweets HT118E - DC;AC current measurement; NCV test; Live test

Á\ Te avoid damaging the instrument or equipment, check the fuse before measuring and ensure that the measured
current does not exceed the rated maximum current; use the correct input
1) Tum the rotary switch to “AE or “RA” or “Kir and select AC or DC current function by “FUNG. key.
2) Insert the red lead in “mA” terminal (current < 200mA) or “10A” terminal (current < 10A) „insert the black lead in
“COM! terminal
3) Disconnect the power of the tested circuit; connect the meter to the circuit under test, then turn on the circuit power
supply.
4) Read the measurement result on the screen. When measuring AC current, the frequency is displayed on LCD
simultaneously.
Note: When the measuring current is over 1A, the orange backlight will illuminate,
NCV test
1) Tum the rotary switch to the * Bis ” and switch to NCV test function by "FUNC.” key, the meter will display "NCV”.
2) Then NCV probe gradually approaches the detected point.
3) When the meter senses weak AC signals, the green indicator lights up and meter beeps slowly.
4) When the meter senses strong AC signals, the red indicator lights up and meter beeps fast.
Live test
Á\ In order to avoid possible accidents such as electric shock or personal injury, please follow the safety regulations.
1) Tum the rotary switch to the * Be * and switch to live test function by “FUNC.” key, the meter will display “LIVE”.
2) Insert the red lead in * vareiùn “terminal, then the probe contact to the test point
3) When the meter senses weak AC signals, the green indicator lights up and meter beeps slowly.
4) When the meter senses strong AC signals, the red indicator lights up and meter beeps fast,
de