Need help?Do you have a question about the Kaiweets HT118E and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Voltage (AC) | 600V |
| Max Voltage (DC) | 600V |
| Max Current (AC/DC) | 10A |
| Current Range (AC/DC) | 600μA/6000μA/60mA/600mA/10A |
| Resistance Range | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Continuity | Yes |
| Diode Test | Yes |
| NCV | Yes |
| Backlight | Yes |
| True RMS | Yes |
| Safety Rating | CAT III 600V |
| Battery | 2 x 1.5V AAA |
| Display | LCD |
| Voltage Range (AC) | 6V/60V/600V |
| Voltage Range (DC) | 6V/60V/600V |
| Capacitance Range | 6nF/60nF/600nF/6μF/60μF/600μF/6mF |
| Frequency Range | 10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz/10MHz |
| Temperature Range | -20°C to 1000°C |
Key safety warnings to prevent electric shock or personal injury, emphasizing manual review and instrument checks.
Steps for safe operation, including probe handling, connection order, and battery replacement guidance.
Precautions for instrument usage in specific environments and handling potential measurement anomalies.
Procedure for replacing the multimeter's battery, including safety steps and tool usage.
Instructions for measuring DC and AC voltage, including range, probe connection, and display notes.
Procedure for measuring frequency and duty cycle, including rotary switch settings and connection methods.
Steps for measuring temperature using a K-Type thermocouple, including probe placement and reading settlement.
Procedure for Non-Contact Voltage (NCV) testing, indicating signal strength via indicator lights and beeps.
Procedure for testing live voltage, involving rotary switch selection and probe contact for AC signal detection.
Details on the instrument's accuracy under reference environmental conditions and the formula for calculating accuracy.
Instructions for cleaning the multimeter's terminals and cabinet to ensure accurate measurements and prevent damage.
Steps for safely replacing a blown fuse, including opening the case, selecting the correct fuse, and reassembly.
To Next Page
