Kaiweets HT118E - Sleep Mode; DC;AC voltage measurement

Sleep Mode
The Meter automatically enters sleep mode if there is no operation in 15 minutes to save battery eneray. Pressing any
button or turning the rotary switch awakes the Meter.
If you press the "FUNC.” button and tum on the meter, the sleep mode will be deactivated, After restarting, the meter will
restore Sleep Mode.
Measurement Operation
DC/AC voltage measurement
Á\ ponttuse it to test voltage over DC1000V or AC750V, the instrument may be damaged. Always test knoum
voltage with the meter before using to confirm the instrument function is intact
1) Tum the rotary switch to * HET » and select DC/AC voltage function by "FUNC.*
2) Insertthe red lead in“ vaszkan ”terminal, insert the black lead in “COM” terminal
3) Connect the test leads to the source or load to be measured.
4) Read LCD display, when measuring AC voltage the frequency is displayed simultaneously.
Note: When the measuring voltage is over 80V, the orange backlight will Iluminate,