Kaiweets HT118E - DC;AC voltage mV measurement; Frequency;Duty measurement (Hz%)

DC/AC voltage mV measurement
Â, pont use it to test voltage over DC 250V, the instrument may be damaged. Always test known voltage with the
meter before use to confirm the instrument function is intact. Always test known voltage with the meter before use to
confirm the instrument function is intact.
Pr
1) Tum the rotary switch to” ni "and select DC/ AC voltage function by "FUNC.” key.
deel
2) Insert the red lead in * Vafzklie » terminal, insert the black lead in “COM! terminal.
3) Connect the test leads to the source or load to be measured.
4) Read LCD display, when measuring AC vollage the frequency is displayed simultaneously.
Frequency/Duty measurement (Hz%)
1) Tum the rotary switch to “Hz”
dE3he)
2) Insert red lead in * VaHzkLne ” terminal, insert the black lead in “COM” terminal.
3) Connect the test leads to the source or circuit in parallel to be measured, measure the frequency and duty.
4) Read the measurement result on the screen.