Need help?Do you have a question about the Kaiweets HT118A and is the answer not in the manual?
General| True RMS | Yes |
|---|---|
| Continuity Buzzer | Yes |
| Diode Test | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| NCV | Yes |
| Auto Power Off | Yes |
| Battery | 3 x 1.5V AAA |
| Display | LCD, 6000 counts |
| Frequency | 10Hz to 10MHz |
| Temperature | -20°C to 1000°C |
| Duty Cycle | 1% to 99% |
| Safety Rating | CAT III 1000V, CAT IV 600V |
| Dimensions | 45 mm |
| Weight | approx. 350g |
| DC Voltage | 600mV/6V/60V/600V/1000V ±(0.5%+3) |
| Resistance | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+3) |
"Warning" mark indicates conditions and operations that may cause danger to users.
Lists precautions before use, probe checks, usage compliance, PPE, battery status, environment, and probe handling.
Details on checking probe condition, replacement, and safe usage with the instrument.
Explains symbols like High voltage warning, AC/DC, Fuse, Double insulated, CE, RoHS, and CAT II/III/IV ratings.
Lists and labels components like NCV probe, flashlight, LCD display, rotary switch, and input terminals.
Describes the FUNC. key's role and how to use the Data Hold function.
Explains MIN/MAX measurement, backlight operation, and flashlight usage.
Explains automatic sleep mode, battery saving, and LED terminal indications.
Explains the orange backlight illumination for high voltage or current.
Steps to set the knob, connect probes, measure voltage, and read results. Includes warnings.
Steps for measuring DC/AC voltage in mV range, including probe connection and safety warnings.
Instructions for measuring frequency and duty cycle, including probe connection and warnings.
Guide for measuring DC/AC current, including probe connection, circuit connection, and safety.
Steps for measuring resistance, including probe connection, circuit disconnection, and safety warnings.
Instructions for continuity testing, including buzzer and indicator behavior, and safety.
Guide for measuring diode forward voltage, including probe connection and safety.
Steps for measuring capacitance, including probe connection and safety warnings.
Instructions for NCV testing, indicator lights, and beep sounds for signal strength.
Steps for live voltage testing, similar to NCV but for live circuits.
Guide for temperature measurement using a K-Type thermocouple, including probe connection and safety.
Covers display counts, measurement types, safety ratings, fuse protection, and sampling rate.
Specifies battery type, operating/storage conditions, altitude limits, and pollution level.
Details accuracy, resolution, input impedance, max voltage, and overload protection for DC voltage.
Provides accuracy, resolution, input impedance, max voltage, and frequency response for AC voltage.
Details accuracy, resolution, overload protection, max current, and measurement duration for DC current.
Lists accuracy, resolution, overload protection, max current, and frequency response for AC current.
Provides accuracy and overload protection details for various resistance ranges.
Details accuracy and overload protection for capacitance measurement ranges.
Provides accuracy for frequency and duty cycle measurements across different ranges.
Details range, voltage sensitivity, and overload protection for Hz/duty and voltage measurements.
Covers range, voltage sensitivity, and overload protection for current measurements (µA, mA, A).
Details function, voltage, and overload protection for diode test and continuity test.
Lists accuracy for temperature measurements in °C and °F, excluding probe error.
Detailed steps for cleaning dust from terminals and the instrument casing. Includes a warning.
Instructions for turning off power, opening cover, replacing batteries, and installing cover. Includes warnings.
Instructions for replacing a fuse, including safety precautions and ensuring correct fuse type.
To Next Page
