7
FUNC. keys
When there are multiple measuring functions on a gear, the
FUNC. key switch function is adopted.
Data hold
Press”HOLD” key, enter/cancel data hold mode.
MIN MAX Measurement
Press the MAX/MIN key to enter the MIN MAX mode and then
press the loop to display the maximum and minimum values.
Press and hold for more than 2 seconds to exit the MIN MAX
mode.
Backlight
Press “ ”key, turn on/off the backlight. After about 10
seconds of inactivity it will automatically shut down.
Flashlight
Press key and keep more than 2 seconds to turn on/off the
flashlight.
To Next Page
Loading...
