8
Sleep Mode
The Meter automatically enters sleep mode if there is no
operation for 15 minutes to save battery energy. Pressing any
button or turning the rotary switch awakes the Meter.
If you press the "FUNC." button and turn on the meter, the
sleep mode will be deactivated. After turning off the meter,
The Meter will restore Sleep Mode after power off.
LED-Terminal Indication
Turn on the Meter and switch the gear, the corresponding light
on the terminal flashes to imply the correct input terminal.
High voltage prompt function
When the measuring voltage is greater than 80V or the
measuring current greater than 1A, the orange backlight will light
up, prompting the users to be careful.
To Next Page
Loading...
