18
Live test
1) Turn the knob to the “ ”, and Switch to live test function by
"FUNC." key. Meter will display "LIVE".
2) Insert the red probe in “ ” terminal, Then the probe
contact to the test point
3) When the meter senses weak AC signals, the green indicator
lights up, at same time, the beeps send out slow dips.
4) When the meter senses strong AC signals, the red indicator
lights up, at same time, the beeps send out fast dips.
4) WARNING
In order to avoid possible accidents such as electric shock or
personal injury, please follow the safety regulations.
To Next Page
Loading...
