Kaiweets KM312AB - Page 4

shock and arc blast injury where
hazardous live conductors are
exposed.
Limit operation to the specified
measurement category, voltage, or
amperage ratings.
Use Product-approved
measurement category (CAT),
voltage, and amperage-rated
accessories (probes, test leads,
and adapters) for all
measurements.
Do not touch voltages >30 V ac
RMS, 42 V ac peak, or 60 V dc.
Use the correct terminals, function,
and range for measurements.
Do ot use the product around
explosive gas, vapor, or in damp or
wet environments.
Do not operate the product with
covers removed or the case open.
2