Kaiweets KM601s - Safety Information; Warnings: Read First

[Safety Inform:
The multimeter conforms to IEC61010-1 CAT.IIl 1000V, CAT.IV 600V overvoltage safety
standards and pollution level 2.
A warning identifies conditions and procedures that are dangerous to the user.
EN
AWamIngs:Read First
To avoid possible electric shock or personal injury, please obey the following instructions:
® Do not test voltage beyond 60VDC, 30VAC RMS, or 42V peak. Or there is a risk of electric
shock.
® Do not measure voltages higher than the rated value between terminals or between terminals
and ground.
® Check that the meter is working properly by measuring a known voltage, and do not use it again
if it is not normal or has been damaged.
@ Before using the meter, check the meter case for cracks or damaged plastic parts, and if so, do
not use it again.
® The meter should only be used with the meter pen provided to comply with the safety
standards.
® Before using the meter, check the test leads for cracks or damage. If so, replace it with the
same type and electrical specifications. When using the meter, hold your fingers behind the
1