KAKA Industrial W-3616Z User Manual




W-3616Z Pan Box Brake
Operator Manual
KAKA INDUSTRIAL LLC

KAKA Industrial W-3616Z Specifications

General

Brand	KAKA Industrial
Model	W-3616Z
Category	Industrial Equipment
Language	English

Summary

Safety Precautions

General Safety Warnings

Covers eye protection, crush hazards, noise, and moving object clearance.

Operating Safety Rules

Rules for operator qualification, guard checks, work area safety, and proper attire.

Technical Specifications

Product Description

Machine Handling and Installation

Cleaning Procedures

Remove rustproof waxy oil using degreaser; avoid acetone or petroleum products.

Transporting and Lifting

Use skilled workers, ensure balance, and use appropriate lift equipment for safe movement.

Installation Guidelines

Site selection, leveling, floor support, and working clearances for proper setup.

Anchoring the Machine

Position on a firm, level floor and anchor using bolts or tie rods.

Setup and Adjustments

Adjusting the Setback

Set distance from finger edge to clamp block based on material thickness and bend radius.

Adjusting Clamping Pressure

Adjust tension for medium resistance for definite locking of the piece part.

Operation and Bending

Bending Sheet Metal

Align fingers, insert part, clamp, pull handle to bend, lower leaf, and remove.

Bending Concepts

Understand bending allowance and springback for accurate bends.

Material Selection

Guidelines for selecting clean, dry, smooth, and dimensionally consistent materials.

Lubrication and Maintenance

Oil Ports

Apply 5-6 drops of #30W oil weekly to machine ports for lubrication.

Parts Identification

Parts Drawing

Visual representation of machine components with part numbers.

Parts List

Detailed list of machine parts with item numbers, descriptions, and quantities.

Troubleshooting