KAKA Industrial W-4816Z User Manual

Operation Manual W-4816Z
KAKA Industrial®
— 1 —
Unpacking
The Pan & Box Brake is shipped
from the manufacturer in a carefully
packed ply-wood case. Thoroughly
inspect the product upon opening the
package.
After unpacking the unit,carefully
inspect for any damage that may
have occurred during transit. Check
for loose, missing, or damaged parts.
Immediately report missing parts to
dealer.
If damage has occurred, shipping
damage claims must be led with the
carrier and are the responsibility of
the user.
Specications
The Model W-4816Z Pan & Box
Brake is hand operated and capable
of bending up to 16 ga. (1.52mm) mild
steel and 20 ga. (.912mm) stainless
x 48” (1219mm) long allowing it to
fabricate pans, channels, angles,
and other shapes. Adjustable
counterweights allow the operator
to balance the bending leaf to
correspond to material thickness. An
adjustable stop gauge is included to
allow the operator to perform repeat
bends.
Item No. ................................173123
Model..............................W-4816Z
Bending Length.........48" (1220 mm)
Bending Thickness......16Ga (1.5 mm)
Bending Angle........................0-135°
Packing size......62"x18"x26" (158x45x65 cm)
N.W/G.W. ........365/405 lbs (166/184 kg)
SAVE THESE INSTRUCTIONS
Thank you for purchasing our
W-4816Z Pan and Box Brake. Before
attempting to operate your new
tool please read these instructions
thoroughly. You will need these
instructions for the safety warnings,
precautions, assembly, operation,
maintenance procedures, parts list
and diagrams. Keep your invoice
number with these instructions. Write
the invoice number on the inside of
front cover. Keep the instructions and
invoice in a safe, dry place for future
reference.
General Safety Information
CAUTION
For your own safety, read all of the
instructions and precautions before
operating tool.
SAFETY RULES
1. Wear proper apparel. Do not wear
loose clothing, gloves, neckties,
rings, bracelets or other jewelry which
may get caught in moving parts of
machine.

KAKA Industrial W-4816Z Specifications

General

Brand	KAKA Industrial
Model	W-4816Z
Category	Industrial Equipment
Language	English

Summary

Instruction and Safety Guidelines

Save These Instructions

Read the manual thoroughly for safety warnings, operation, and maintenance procedures.

General Safety Information

Read all instructions and precautions before operating the tool for operator safety.

Detailed Safety Rules

Personal Protective Equipment

Wear appropriate apparel, safety shoes, glasses, and hair covering to prevent injury.

Workplace Safety Practices

Maintain a clean, well-lit area, keep visitors and children away, and ensure tools are stored safely.

Tool Assembly and Condition Checks

Operational Knowledge

Machine Capacity and Limits

Do not overload the machine or use it for purposes other than bending sheet metal.

Important Warnings and Precautions

General Warning on Manual Limitations

Manual cannot cover all situations; operator must use common sense and caution.

Machine Installation and Components

Adjustment Procedures

Clamping and Bending Operations

Adjusting Clamping Pressure

Clamping Pressure Safety

Warnings regarding excessive or insufficient clamping pressure to prevent damage and ensure safety.

Bending Accuracy and Operation

Operational Safety Precautions

Maintenance and Support

Routine Maintenance Procedures

Maintenance Safety Warning

Emphasizes following safety precautions when performing maintenance on machinery.

Troubleshooting Common Issues

Troubleshooting Inaccurate Bends

Diagnosing causes like finger misalignment or incorrect setback and applying remedies.

Troubleshooting Bending Leaf Resistance

Addressing issues where the bending leaf is difficult to lift, such as exceeding limits or counterweight issues.