KAKA Industrial SBG-40 - User Manual

Operation Manual SBG-40
KAKA
®
Industrial
- 1 -
Specifications
Model............................................SBG-40
Stock No. .....................................173203
Bending strength :
28-1/2 Tons per square inch(4.42T)Flat
Maximum
Capacities(Steel & iron) :
5/8"Round stock(16mm)
1/2"X 1/2"Squre stock(13X13mm)
1-3/16"X5/16"Strip stock(30X8mm)
Maximum capacities (Wrought iron) :
15/32"Round stock(12mm)
13/32"X 13/32"Squre stock(10X10mm)
1-3/16"X1/4"Strip stock(30X8mm)
Maximum capacities (Brass & Copper) :
5/8"Round stock(16mm)
15/32"X 15/32"Squre stock(12X12mm)
1-3/16"X5/16"Strip stock(30X8mm)
Maximum capacities (Aluminum) :
23/32"Round stock(18mm)
19/32"X 19/32"Squre stock(15X15mm)
1-3/16"X13/32"Strip stock(30X10mm)
Unpacking
The UNIVERSAL BENDER is shipped
from the manufacture in a carefully
packed Carton box. Thoroughly inspect
the product upon opening the package.
After unpacking the unit, carefully inspect
for any damage that may have occurred
during transit.
If damage has occurred, shipping
damage claims must be filed with the
carrier and are the responsibility of the
user.
Check for completeness. Immediately
report missing parts to dealer.
Carefully open crate and unbolt brake
from shipping pallet and remove from
crate using heavy duty lifting equipment
such as an overhead crane.
Warning
The warnings, cautions and instructions
discussed in this instructions or situations
that could occur. It must be understood by
the operator that common sense and
caution are factors which cannot be built
into this product, but must be supplied by
the operator.

Summary

Specifications

Bending Strength

Specifies the bending strength of the industrial bender in tons per square inch.

Material Capacities

Lists maximum capacities for bending steel, iron, wrought iron, brass, copper, and aluminum.

Unpacking Instructions

Damage Inspection

Instructions to inspect the product for damage during transit and file claims.

Completeness Check

Guidance on checking for missing parts and reporting them to the dealer.

Safety Warning

Operator Responsibility

Emphasizes operator's role in using common sense and caution.

Important Safety Precautions

Workspace and Personal Safety

Guidelines for a clean, well-lit, safe work area, proper dress, and eye protection.

Tool Handling and Maintenance

Precautions for proper tool usage, maintenance, and damage checks before use.

OPERATING PROCEDURES

Round Operation Steps

Steps 1-10 detailing the process for performing round bending operations.

Angle Operations

Angle Bending Setup

Instructions for setting up and performing angle bending using specific dies and gauges.

Spiral Operation

Spiral Bending Setup

Steps to set up and perform spiral bending operations using forming dies.

Parts List

Component Identification

A detailed list of all parts with their corresponding item numbers and descriptions.

Diagram

Component Illustration

An exploded view diagram illustrating the assembly and identification of all machine components.

Notes

User Notes Section

An empty section provided for users to record important notes or observations.

Service Record

Maintenance Log

A log for recording maintenance performed and required repair components for the tool.

Contact Information

Customer Support

Contact details for KAKA INDUSTRIAL LLC, KAKA INDUSTRIAL LTD., and KANG INDUSTRIAL PTY LTD for inquiries.

KAKA Industrial SBG-40 Specifications