20 V User Manual Impulse Pedelec
8 Charger
Read the two type plates on the charger before using it for
the rst time.
You can charge your Pedelec with Impulse drive directly
via a charging socket in the battery. The battery can re-
main on the Pedelec when the charging operation is in
progress.
You can also take the battery out of the holder and charge
it in the docking station. This recommended if it is cold
outside in order to charge the battery in a warm room.
Do not use other chargers. Only charge the battery us-
ing the charger provided, or a charger approved by us.
› If a charging fault occurs, the LED in the charger
ashes red.
› Take the battery briey out of the charger, then put
it back in. The charger tests the battery and cor-
rects any faults that may be present.
› If the LED still ashes, take the battery to your
specialist cycle shop and have it checked.
If used incorrectly, the device may be damaged or
inict injuries.
› Before cleaning the charger, always pull the plug
out of the socket to avoid a short-circuit and/or
physical injury.
› Only use the charger in dry rooms.
› Only place the charger in a secure stable position
on a suitable surface.
› Do not cover the charger or place any objects on
it as otherwise it could overheat and catch re.
To Next Page
Loading...
