EasyManua.ls Logo

KAM KMD14.2 - Page 5

KAM KMD14.2
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(33) DIGITAL EFFECTS PROCESSOR
99 Effects (for details see table at the end of the manual)
01 08 Reverb Hall
09 14 Reverb Room
15 20 Reverb Plate
21 25 Ambient
26 31 Gated Reverb
32 37 Reverse Reverb
38 45 Echo & Room/Hall
46 50 Voice Doubler
51 58 Single Delay
59 69 Echo 50% F.B.
70 78 Chorus
79 87 Flanger
88 93 Tremolo
94 99 Wah Wah
(34) SEVEN BAND GRAPHIC EQ Adjusts input sensitivity from-10dB to +10dB at the following frequencies: 60Hz, 160Hz,
410Hz, 1.1KHz, 2.3KHz, 6.2KHz and 15.6KHz.
(35) EQ IN Releases the output signal from equalisation.
(36) AUX SENDS GAIN CONTROL You can have a further +15dB available from these outputs.
(37) FX SENDS GAIN CONTROL Gives a further +15dB from the FX sends.
(38) AUX PFL / (39) FX PFL
(40) AUX OUTPUT CONTROL Adjusts the output level from AUX.
(41) FX OUTPUT CONTROL Adjusts the output level of FX.
(42) ALT 3-4 OUTPUT LEVEL CONTROL Controls the ALT 3-4 signal.
(43) & (44) L R MASTER OUTPUT CONTROL Controls the Left and Right signals.
(45) 2-TRACK INPUT
(46) ALT3-4 OUTPUT PF
(47) ALT3-4 BUS L
(48) HEADPHONE VOLUME CONTROL Controls the output level of headphone and monitors the signals reverb from speaker.
(49) 2-TRACK OUTPUT
(50) MAIN MIX
(51) ALT3-4 OUTPUT PFL
(52) PFL/SOLO
(53) OUTPUT LEVEL DISPLAY AND WORKING INDICATOR You can choose the master channel and monitor the output level
from the chosen bus channel.
(54) +48V PHANTOM POWER
(55) POWER INDICATOR
(56) & (57) UP AND DOWN BUTTONS To choose the desired preset.
(58) ENTER BUTTON Activates the selected preset.

Related product manuals