Kangaroo Ava 9301B - Assemble Drawer Sides

Assembly InstructionsAva
21
Step 2: Drawers
K4
K5
K3
K2
K4
3.5x35 Screw x8
s2
X2
X2
In order to access pre drilled screw holes in
Panels K4 and K5, you will have to temporarily
remove the outside screws and pivot the drawer
rails.
Repeat for second drawer.
Attach Panels K2 and K3 to Panel K4
as shown, using S2 Screws.
Repeat for second drawer.
s2
TIP: Be sure that K2 and K4 are flush against each oth-
er. This will make installation of Panel K7 (drawer front)
on Page 23 easier.