Assembly InstructionsKangaroo
8
Part 1: Cabinet Shell
Lift Rail (Right) x1
Lift Rail (Left) x1
3.5x14 Screw x6
Attach Lift Rail (Right) to Panel
Z with s1 Screws following pre-
drilled holes.
Attach Lift Rail (Left) to Panel Y with
s1 Screws following predrilled holes.
TIP: Spray a small amount of
WD-40 or similar lubricant onto a
paper towel and wipe the newly
installed rails. This will make lift
installation and operation easier.
To Next Page
Loading...
