Kango 710 Series User Manual

22
Service and Repair Manual
Model 710/760
Service and Repair Manual
Model 760KV/SV/MV
Fig. 37
Dismantling
the bevel
pinion
1. Bend back tab washer (70), remove clutch
nut (68) and the following items from bevel
pinion (77):
- disc spring (69)
- tab washer (70)
- friction disc (71)
- drive gear (72)
- bush (73)
- circlip (74)
- pinion (75)
- O-ring (76)
2. Remove pinion and bearing assembly from top
housing (112).
3. Remove bearing (75) from pinion (77) and O-ring
(76) from top housing (112).
77
75
73
71
69
76
74
72
70
68
112

Kango 710 Series Specifications

General

Brand	Kango
Model	710 Series
Category	Power Tool
Language	English