Kango 800S - Specific Safety Rules; Specifications; Functional Description

page 3
SPECIFIC SAFETY RULES
1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
Service Agent facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Symbology
Canadian Standards Association
Amperes
Double Insulated
Underwriters Laboratories, Inc.
Volts Alternating Current
No Load Revolutions per
Minute (RPM)
Hertz
Specifications
Cat.
No.
800S
845S
Percussion
Core
Bits
--
6"
Load/
No
Load
RPM
--
150-400*
Percussion
Carbide
Tipped
Bits
--
1-3/4"
Load/
No Load
Blows per
Minute
1300-3450*
1300-3450*
Volts
AC
Only
120
120
Self-
Drilling
Anchors
--
5/8"
Chisels
Round/
Hex
See p.8
* EFCC - The Electronic Feedback Control Circuit maintains constant speed under
varying load conditions.
1. Rear side handle mount
2. Vibration Isolation System
3. Speed control dial
4. Handle
5. Trigger
6. Nameplate
7. Stop rotation knob (Cat. No. 845S)
8. Bit lock
9. Dust shield
10. Vibration isolation side handle
11. Depth gauge adjustment knob (Cat. No. 845S)
12. Depth gauge (Cat. No. 845S)
Amps
13.0
13.0
3
6
12
2
1
5
4
7
8
10
11
Cat. No. 845S
9
To reduce the risk of injury, user
must read and understand
operator's manual
FUNCTIONAL DESCRIPTION