To Next PageTo Next Page
Need help?Do you have a question about the Kango 840M and is the answer not in the manual?
Feature that gradually increases motor speed for reduced torque reaction.
Electronic system maintaining constant speed under varying load conditions.
Alerts user when the tool requires servicing and indicates motor shut-off.
Indicates when power is supplied to the Electronic Feedback Control Circuit.
Selects operation mode: hammering-only, hammering-with-rotation, or chisel angle adjustment.
Adjusts rotating speed (RPM) and impact rate (BPM) for optimal performance.
Instructions for attaching SDS Max and Spline Drive bits and chisels to the rotary hammer.
Guide on how to reposition the side handle for better tool control and user comfort.
Guidelines for regular inspection, care, and upkeep of the tool.
Instructions for cleaning the tool, including recommended cleaning agents.
Information on how to handle tool damage and where to seek professional repair.
General| Brand | Kango |
|---|---|
| Model | 840M |
| Category | Rotary Hammer |
| Language | English |
