9
2.1.2 Running KDMElite30 on Mac OS X
To run KDMElite30 from Mac OS X, connect your Defender Elite30 to your computer through a USB
port. A CD icon named ‘KDMElite30’ will appear on the desktop. Double click on the KDMElite30
icon to open it.
In the window that opens, double-click on the KDMElite30.app file to launch the KDMElite30
application.
If it is your first time running KDMElite30 you will need to complete the setup wizard in order to set
your security password (see section 2.2 The Setup Wizard on page 10). If you have already setup your
security password, you will be prompted to login (see section 2.3 Unlocking the Security Partition on
page 16).
Caution! The KDMElite30.app file needs to remain on your Defender Elite30’s CD-ROM partition at
all times. Always run the application from the Defender Elite30’s CD-ROM partition. Do not try to copy
KDMElite30 or run KDMElite30 from your computer’s hard drive.
Note: The KDElite30 icon is not always displayed on the desktop. If you do not see the KDMElite30
icon on your desktop, you can locate the KDMElite30.app file on the CD-Rom partition through the
Finder window.
Running KDMElite30 on Mac OS X
To Next Page
Loading...
Need help?
General