Kannad 406 AP User Manual

DMA185K
Ref. 0139180K
TP PAGE : 1
Date of rev. JUL 24/2013
Revision 09
First issue: JUL /1999
Emergency Locator Transmitter
Orolia S.A.S. - A Company of the Orolia Group
INSTALLATION MANUAL
OPERATION MANUAL
KANNAD 406 AP
P/N : S1820502-XX KANNAD 406 AP transmitter
P/N : S1820511-01 Mounting bracket, 1 strap
© Orolia S.A.S.: This document is the property of Orolia S.A.S. and contains proprietary and confidential information.
The document is loaned on the express condition that neither the document itself nor the information contained therein shall be disclosed without the express consent of Orolia S.A.S. and that the information

Kannad 406 AP Specifications

General

Power Output	5 W
Operating Temperature	-20°C to +55°C
Frequency	406 MHz
Category	Emergency Locator Transmitter (ELT)
Waterproof	Yes
Activation	Automatic or Manual

Summary

System Overview

KANNAD 406 AP Product Presentation

Overview of the KANNAD 406 AP ELT and its main components.

Line Replaceable Units (LRUs)

System Operation & Performance

Transmitter Operation

Details on how the KANNAD 406 AP transmitter sends distress signals.

Front Panel Controls

Description of the controls on the ELT front panel and their functions.

Operating Modes

Explanation of the ELT's different operating modes: Off, Self-Test, Armed, On.

Battery Autonomy

Electrical Characteristics

Technical Specifications

Key technical specifications of the KANNAD 406 AP ELT.

Activation Procedures

Instructions for automatic and manual activation of the ELT.

Reset and Self-Test

Procedures for resetting the ELT and performing self-tests.

Installation & Removal

Registration and Programming

Requirements for ELT registration and programming before installation.

Bracket and ELT Mounting

Recommendations and procedures for installing the ELT and its bracket.

Transmitter Mounting

Steps for mounting the transmitter onto the bracket.

Antenna Installation

Guidelines and procedures for installing the external antenna.

First Power Up

Steps for performing initial power-up tests after installation.

ELT Removal

Maintenance and Testing

Periodic Self-Test

Guidance on performing periodic self-tests of the ELT.

ELT Operational Tests

Tests to verify the ELT's operational status after installation.

RCP Test Procedures

Transmission Frequency Tests

Troubleshooting

Fault Diagnosis

Self-Test Faults

Other Faults

Servicing and Battery

Maintenance Schedule

Periodic Inspection

Six-Year Servicing

Battery Replacement